Get more details about this product Get more details about this product
Honeywell Logo
Building Products
X
Start your Search with category name, product name, part number, etc.
OTP

Please input your OTP sent to your registered mobile number

OTP

Please input your OTP sent to your registered Email Address

PREDICTIVE Fire
Monitoring System
Industry-first solution that helps to reduce the risk of highly destructive electrical fires

Electrical Fire Monitoring

The Problem: Dangers & Effects Of Electrical Fires

Did you know that electrical fires cause a whopping 25,000 deaths in India?
Or that 42% of fire incidents can be traced to electrical causes? Many of these fires result from faults or defects in electrical equipment, or due to the usage of non-standard products. These issues often lead to dangerous short circuits, which ultimately result in severe fires. Even worse, these fires spread so quickly that remedial action has very little – or no –impact on loss mitigation.
Short circuit-triggered fires take the lives of 13 Indians every single day and also cause 8% of deaths in Indian factories. These facts provide plenty of evidence of how dangerous electrical fires can be.

 
 
 

42% FIRE INCIDENTS

Are caused by short circuits due to electrical equipment faults/defects OR use of non-standard electrical products
 
 

8% DEATHS IN FACTORIES

Are attributed to electrical causes
 
 

HARMONICS

Computers and other non-linear electrical loads lead to electrical network overheating
 
 

POOR CONNECTIONS AND EARTHING

One of the biggest causes of electrical fires
 
 

VOLTAGE SURGES

Come into play in heating of cables and equipment in the electrical network, but are not always obvious
 
 

EXCESSIVE THERMAL INSULATION

Overloads and excessive thermal stress with heating
 
 

NEW LOADS

Short circuits due to design inadequacies, wiring mistakes and new loads on old wiring
The Solution: Electrical Fire Monitoring
Honeywell presents the world’s first Predictive Fire Monitoring System. This low-voltage/ equipment-safety early warning system reduces the risks of hazardous fires that may occur due to temperature variations, current leakages or short circuits. Backed by Honeywell’s world-class engineering and design practices, this reliable system empowers you to enhance the safety of your building’s electrical setup so you no longer have to worry about electrical fires or the potential damage they can cause to life and property.
The system boasts intelligent, network-based operations, automation and continuous monitoring. It can detect current leakages and temperature changes of all monitored equipment, and display its findings to safety personnel. All in all, it provides a comprehensive, ultra-high-tech fire-fighting joint control system that modern buildings desperately need.
  • PERFECT FOR ELECTRICAL FIRE PROTECTION

    Low voltage/equipment safety early warning system

  • PROACTIVE RISK MONITORING

    Continuously monitors leakage current and temperature changes in electrical equipment

  • LOWER DANGER OF HAZARDOUS FIRES

    Lowers the probability of hazardous fires due to temperature variations or current leakages

EFM System Architecture

PRODUCT COMPONENTS

High-tech components create a powerful integrated system
In Honeywell’s industry-leading Predictive Fire Monitoring System, each module works seamlessly with the others to create a powerful and highly reliable fire detection and prevention system.
ELECTRICAL FIRE MONITORING PANEL
ELECTRICAL FIRE MONITORING DETECTOR
RESIDUAL CURRENT TRANSFORMER
TEMPERATURE SENSING PROBE

SSDH-J620

Feature-rich Electrical Fire Monitoring Panel

The SSDH-J620 Electrical Fire Monitoring Panel from Honeywell is a Predictive Fire Monitoring System. It is characterised by a rich feature-set and multiple functions that work together to deliver a system that’s both highly reliable and easy to use. The panel consists of Electrical Fire Monitoring Detector, Residual Current transformer, Temperature Sensing probe. This 5-circuit system offers a communication distance of 1200 meters per circuit and supports up to 255 EFM detectors per circuit.

  • Mode of communication: RS-485 bus
  • In-built thermal printer
  • Residual Current Alarm Value: 30-999mA continuous adjustable, adjusting precision 1mA
  • IP30-rated

KEY FEATURES AND BENEFITS

Industry-first GB 28184-2011-compliant Predictive Fire Monitoring System
Electrical fires can be very difficult to control. And worse, they can cause untold devastation to life and property. And that’s why, when it comes to fire safety, prevention is always better than cure.
Prevent electrical fires in your premises with the first-of-its-kind Predictive Fire Monitoring System from Honeywell. Brought to you by the industry leader in fire safety solutions, this system provides ever-dependable detection capabilities so you can protect your building and everyone within it from devastation and loss.
Equipment-safety early warning system
 
Monitors temperature changes
 
Monitors leakage currents
 
Predictive fire alarm signals
 
Centralised monitoring
 
Event logs
 
No downtime, no shutdowns
 
One product, many applications
Government
Industrial
Residential
Hotels
Data Centre

Innovative products for electrical fire security

A world-class range of products specifically designed to provide protection from electrical fires.

OTP

Please input your OTP sent to your registered email address